free log

Dual-Circuit Transmitters


Dual-Circuit Switch-Style Transmitter -
'Small Frame, Narrow Button'

Transmitter - Small Frame, Narrow Button A simple press of this transmitter will send a signal to change the on/off state of a lightning switch receiver. Typical range is 60+ feet.

All Lightning Transmitters are self-powered (require no batteries) - the action of pushing the switch generates the electricity required to send the wireless signal.
 

This Transmitter emits a "Toggle" command. 

A Receiver will change states when it receives a "Toggle" command. 

If a Receiver is “On” when it receives a "Toggle" code, it will turn “Off” – if it is “Off”, it will turn “On”.

The Large Plate Switch is designed to cover the hole in the wall left after a typical US wired switch has been removed. 

Transmitter Dimensions:   3.27"L x 3.27"W x 0.54"D

(approx.: the same width as a standard North American light switch plate).


Colours:  White, Ivory, Light Almond

Colors

Dual-Circuit Transmitter - Large Frame
(fits a regular North American Light Switch plate)

This Transmitter emits two different "Toggle" codes depending on which side of the button is pushed (a toggle code tells a learnt receiver to change state from on to off, or visa versa).

As a result, this one transmitter can independently control two different receivers/circuits.

The Dual-Circuit Transmitter emits two different "Toggle" codes depending on which side of the button is pushed.

Quick Definition: A toggle code tells a learnt receiver to change state from on to off, or visa versa.

As a result, this one transmitter can independently control two different receivers/circuits.

This transmitter can be wall-mounted (with adhesive pad or screws, both of which are included) or screwed directly onto an existing switchbox (the holes in the outer frame line up with the holes on any standard Canadian/US switchbox).

The frame is just slightly larger than a standard single switchplate to allow it to fully cover an existing single switchbox as well as the small paint chips that often occur when removing old switchplates.

Transmitter Dimensions: 5.14"L x 3.27"W x 0.54"D

(approximately the same size as a North American light switch plate)


Colours:  White, Ivory, Light Almond

Colors